EA25 Drives
CompletePower™ Series

Summary Details

Technology: Brushless, Speed/Torque Control
Quadrants: 2
Nominal Current: 6A

For BLDC Motors. Up to 300W.
This two-quadrant brushless DC speed control is fully enclosed in an extremely small rugged aluminum case which can be DIN-rail mounted or panel mounted for easy integration. The drive includes an adjustable ramp generator for controlled acceleration and a torque mode. Mode of operation is set by simple DIP switches. This drive can provide 6 A of nominal current and can be powered by an 11-50 VDC range of supply voltage. The drive is protected against reversing, over-current, over-temperature and incorporates state of the art MOSFET technology for maximum efficiency. Connectivity is tool-free with RJ-45-CATs connectors for control/feedback inputs and push-type terminals for supply power and motor connections.

Additional Product Details

EA25 Technical Drawings

drawings_ea25.gif

EA25 Specifications

Model Numbers Power Supply Voltage
(VDC)
Aux Voltage
(VDC)
Continuous Current
(Amps)
Peak Current
(Amps)
Max Power
(Watts)
Frequency of
Power Output Stage
(kHz)
Efficiency
(%)
EA2506 11 - 50 5 - 30 6 - 300 with heatsink 50 97

Control Inputs
Hall input signals A, B, C TTL / +5 VDC
Set Value 0 to +10 VDC
Enable TTL / +24 VDC
Brake TTL / +24 VDC
Dir TTL / +24 VDC
Features Selected by Dip Switches
Set Value External / Internal
Operation Mode Speed / Torque
Speed Loop Time Fast / Slow
Intenal Enable On / Off
Outputs
Auxillary Voltage Sources +5 VDC / 20 mA
Auxillary Voltage Sources +10 VDC / 10 mA
Monitor I 0.75 Volts / A
Fault Open Collector / Push Pull / TTL / 24 VDC
Display
LEDs Green = Power / Red = Error
Potentiometers
Function of Potentiometers Speed / Speed max / I max / Ramptime
Mechanical Specs
Dimensions (L x W x H) inches / (mm) 3.66 x 2.19 x .89 / (55) x (22) x (120)
Weight in ounces / (grams) 4.23 (120)
Operating Temperature (°C) -10 to +45
Storage Temperature (°C) -40 to +85
Humidity Range Not Condensing (% rH) 20% to 80% Relative, Non-condensing
Operation Mode
Operation Mode Speed control by Hall
Torque control

EA25 Accessories

Photo Model Number Description User Manual Technical Drawing
$photo CAxxxx RoHS-compliant CAT5E FTP-Patch-Cable with RJ45 connectors at both ends.

Styles available:
- Red 50cm [model: CA2005]
- Red 100cm [model: CA2010]
- Red 200cm [model: CA2020]
- Red 300cm [model: CA2030]
- Yellow 50cm [model: CA4005]
- Yellow 100cm [model: CA4010]
- Yellow 200cm [model: CA4020]
- Yellow 300cm [model: CA4030]
- Gray 50cm [model: CA8005]
- Gray 100cm [model: CA8010]
- Gray 200cm [model: CA8020]
- Gray 300cm [model: CA8030]
Consult Factory Download PDF
$photo IA310x Choke module optimized for brushless drives.
Inductance: IA3100 = 3x50uH; IA3101 = 3x100uH
Nominal current: 10A
Consult Factory Download PDF
$photo MA0025 DIN Rail Mounting Kit for units: DA, EA, and SA-Series. Consult Factory Download PDF
$photo WA2509 Break Out Board for DA, EA and SA-Series. Consult Factory Download PDF

EA25 User Manuals

Model Number User Manual
EA2506 Download PDF (Drive User Manual)
Developer ManualDownload PDF (User Manual)

EA25 Software Download

Software Type Overview
CompletePower Plus™ Setup Utility Software Description
ElectroCraft CompletePower™ Plus Set-up Utility is a Windows-based program used for the setup, parameterization, system diagnostics and motion control management of the ElectroCraft CompletePower Plus line of digital servo drives. The ElectroCraft CompletePower™ Plus Set-Up Utility will lead the user through a Step-by-Step Wizard to create the correct configuration information required for the user to run a particular motor with a particular drive. The result will be an "Application" file containing all of the information required to run the motor with the drive.

System Requirements
Computer ElectroCraft CompletePower™ Plus can be installed on any IBM™ PC compatible computer running:
• Windows 95/98
• Windows NT 4
• Windows 2000
• Windows XP

Display
A VGA display is required. A color monitor display makes it possible to take full advantage of ElectroCraft CompletePower™ Plus's graphic interface. The recommended screen resolution is 1024 x 728. A resolution of 800 x 600 will also function properly.

Printer
The ElectroCraft CompletePower™ Plus Set-up Utility uses the default printer installed on your computer. For optimal resolution, especially when printing graphs, use a high resolution (300-dpi) laser or ink jet printer.

Mouse
A mouse or other pointing device is required to use ElectroCraft CompletePower™ Plus Set-up Utility.

Serial I/O
The ElectroCraft CompletePower™ Plus Set-up Utility can be configured to use the PC's serial port for communication between the host PC and an ElectroCraft drive. A RS-232 serial cable is required between the host PC and the drive.

Download Disclaimer
Software download and registration require Internet Explorer 7 and above, Firefox 3, or Safari.





Download Disclaimer
Software download and registration require Internet Explorer 7 and above, Firefox 3, or Safari.