SCA-B4-70 Drives
CompletePower™ Series

Summary Details

Technology: Brushless Servo
Quadrants: 4
Nominal Current: 10A or 30A

For Brushless Motors. Up to 2100 W.
This four-quadrant brushless DC servo amplifier is fully enclosed in a rugged aluminum case which can be panel mounted or DIN-rail mounted for easy integration. The drive can be configured in a variety of torque and speed control modes with the mode of operation being set by simple jumpers. Both the 10 A and 30 A versions of this drive have an adjustable current limit and can be powered by the same 11 - 70 VDC range of supply voltage. The drive is protected against over-current and over-temperature and motor short-circuit and incorporates state of the art MOSFET technology for maximum efficiency. Connectivity is achieved with simple screw-terminals for control/feedback inputs, supply power and motor connections.

Additional Product Details

SCA-B4-70 Technical Drawings

drawings_sca-b4-70-30.gif

SCA-B4-70 Specifications

Model Numbers Power Supply Voltage
(VDC)
Aux Voltage
(VDC)
Continuous Current
(Amps)
Peak Current
(Amps)
Max Power
(Watts)
Frequency of
Power Output Stage
(kHz)
Efficiency
(%)
SCA-B4-70-10 11 - 70 5 - 24 10 20 700 with heatsink 49 95
SCA-B4-70-30 11 - 70 5 - 24 30 60 2100 with heatsink 49 95

Control Inputs
Set Value -10 to +10 VDC
Encoder input signals channel A,B / TTL / max 100 kHz
Enable 8 to 30
Outputs
Auxillary Voltage Sources 5V/100mA
Auxillary Voltage Sources 15 VDC/20mA
Monitor I 0.25V/.16A
Monitor n 10VDC/nmax
Error open collector max 30VDC
Display
LEDs green = ok / red = fault
Potentiometers
Function of Potentiometers gain course / gain fine / nmax
Mechanical Specs
Dimensions (L x W x H) inches / (mm) SCA-B4-70-10: 7.09 x 3.94 x 1.57 / (180) x (100) x (40)
SCA-B4-70-30: 7.87 x 3.94 x 3.15 / (200) x (100) x (80)
Mounting Hole Distance (mm) 120 X 90
Weight in ounces / (grams) SCA-B4-70-10: 20.46 (580)
SCA-B4-70-30: 40.56 (1150)
Operating Temperature (°C) -10 to +45
Storage Temperature (°C) -40 to +85
Humidity Range Not Condensing (% rH) 20% to 80% Relative, Non-condensing
Operation Mode
Operation Mode speed-control by hall
speed-control by encoder
torque control

SCA-B4-70 Accessories

Photo Model Number Description User Manual Technical Drawing
$photo ASO-BM-70-30 Breaking module in a rugged aluminum case. Consult Factory Download PDF
$photo IA310x Choke module optimized for brushless drives.
Inductance: IA3100 = 3x50uH; IA3101 = 3x100uH
Nominal current: 10A
Consult Factory Download PDF
$photo ASX-RM-01-01 Aluminum DIN Rail Mounting Kit with L-shaped bracket for units:
- SCA-Lx
- SCA-Sx
- SCA-B4-70-10
- not used for SCA-SS-70-30
Consult Factory Download PDF

SCA-B4-70 User Manuals

Model Number User Manual
SCA - B4 - 70 - 10 Download PDF (Drive User Manual)
SCA - B4 - 70 - 30 Download PDF (Drive User Manual)
Developer ManualDownload PDF (User Manual)

SCA-B4-70 Software Download

Software Type Overview
CompletePower Plus™ Setup Utility Software Description
ElectroCraft CompletePower™ Plus Set-up Utility is a Windows-based program used for the setup, parameterization, system diagnostics and motion control management of the ElectroCraft CompletePower Plus line of digital servo drives. The ElectroCraft CompletePower™ Plus Set-Up Utility will lead the user through a Step-by-Step Wizard to create the correct configuration information required for the user to run a particular motor with a particular drive. The result will be an "Application" file containing all of the information required to run the motor with the drive.

System Requirements
Computer ElectroCraft CompletePower™ Plus can be installed on any IBM™ PC compatible computer running:
• Windows 95/98
• Windows NT 4
• Windows 2000
• Windows XP

Display
A VGA display is required. A color monitor display makes it possible to take full advantage of ElectroCraft CompletePower™ Plus's graphic interface. The recommended screen resolution is 1024 x 728. A resolution of 800 x 600 will also function properly.

Printer
The ElectroCraft CompletePower™ Plus Set-up Utility uses the default printer installed on your computer. For optimal resolution, especially when printing graphs, use a high resolution (300-dpi) laser or ink jet printer.

Mouse
A mouse or other pointing device is required to use ElectroCraft CompletePower™ Plus Set-up Utility.

Serial I/O
The ElectroCraft CompletePower™ Plus Set-up Utility can be configured to use the PC's serial port for communication between the host PC and an ElectroCraft drive. A RS-232 serial cable is required between the host PC and the drive.

Download Disclaimer
Software download and registration require Internet Explorer 7 and above, Firefox 3, or Safari.





Download Disclaimer
Software download and registration require Internet Explorer 7 and above, Firefox 3, or Safari.

ElectroCraft Rapid Delivery Program

Some versions of this product are available via ElectroCraft's Rapid Delivery Program. Lead times for these products are given in working days and stated below. Please note, these lead times may be exceeded during holiday periods or due to unforeseen circumstances. Always contact your local ElectroCraft representative for confirmation of availability.

Rapid delivery products are stocked in locations all over the World. If the product you require is not stocked in your region, you may request accelerated delivery from other areas. Please consult your local representative for more information.

Customers are responsible for all freight charges.

Rapid Delivery to:

Select the region where the product would be delivered to.

The Americas

Part Number Description Typical Lead Time
No products available

Europe, the Middle East and Africa

Part Number Description Typical Lead Time
SCA-B4-70-10 SCA-B4, 4-Quad. PWM, 11-70VDC, 10A Nom. Cur, 700w Max. 2

Asia

Part Number Description Typical Lead Time
No products available