EA47 Drives
CompletePower™ Series

Summary Details

Technology: Brushless Servo-PWM
Quadrants: 4
Nominal Current: 9 and 18A

For BLDC Motors. Up to 1260W.
This four-quadrant brushless DC servo amplifier is fully enclosed in a rugged aluminum case which can be DIN-rail mounted of panel mounted for easy integration. The drive can be configured in a variety of torque and speed control modes with the mode of operation being set by simple DIP switches. Both the 98A and 18A versions of this drive have an adjustable current limit and can be powered by the same 9 - 70 VDC range of supply voltage. The drive is protected against over-current and over-temperature and motor short-circuit and incorporates state of the art MOSFET technology for maximum efficiency. Connectivity is tool-free with RJ45-CAT5 connectors for control/feedback inputs and push-type terminals for supply power and motor connections.

Additional Product Details

EA47 Technical Drawings

drawings_ea47.jpg

EA47 Specifications

Model Numbers Power Supply Voltage
(VDC)
Aux Voltage
(VDC)
Continuous Current
(Amps)
Peak Current
(Amps)
Max Power
(Watts)
Frequency of
Power Output Stage
(kHz)
Efficiency
(%)
EA4709 9 - 70 5 - 24 9 18 630 with heatsink 50 97
EA4718 9 - 70 5 - 24 18 36 1260 with heatsink 50 97

Control Inputs
Set Value -10 to +10 VDC
Enable TTL / +24 VDC
Features Selected by Dip Switches
PWM-, Hall-, Enc-, Torque not set/set
Phase 120/60
Enable on / off
Set value via Offset offset/ext
Ipeak on/off
Outputs
Auxillary Voltage Sources 5V/50mA
Auxillary Voltage Sources 10 VDC/10mA
Monitor I 0.5V/1A
Monitor n 10VDC/nmax
Error open collector / push pull / TTL / 24V
Display
LEDs green = power / yellow = error
Potentiometers
Function of Potentiometers offset / nmax / gain / ramp time
Mechanical Specs
Dimensions (L x W x H) inches / (mm) (119) X (85) X (27.5)
Mounting Hole Distance (mm) 112 X 50
Weight in ounces / (grams) (220)
Operating Temperature (°C) -10 to +45
Storage Temperature (°C) -40 to +85
Humidity Range Not Condensing (% rH) 20% to 80% Relative, Non-condensing
Operation Mode
Operation Mode speed-control by hall
speed-control by encoder
torque control

EA47 Accessories

Photo Model Number Description User Manual Technical Drawing
$photo ASO-BM-70-30 Breaking module in a rugged aluminum case. Consult Factory Download PDF
$photo WA2509 Break Out Board for DA, EA and SA-Series. Consult Factory Download PDF
$photo MA3050 DIN Rail Mounting Kit for the ASO-BM-70-30 breaking module. Consult Factory Download PDF
$photo HA3008 Passive heatsink optimized for SA45, EA27, EA47 and DA47 drives. Consult Factory Download PDF
$photo HA3018 One fan heatsink optimized for SA45, EA27, EA47 and DA47 drives. Fan is 1 x 24VDC, .8W. Consult Factory Download PDF
$photo HA3028 Two fan heatsink optimized for SA45, EA27, EA47 and DA47 drives. Fans are 2 x 24VDC, .8W. Consult Factory Download PDF
$photo CAxxxx RoHS-compliant CAT5E FTP-Patch-Cable with RJ45 connectors at both ends.

Styles available:
- Red 50cm [model: CA2005]
- Red 100cm [model: CA2010]
- Red 200cm [model: CA2020]
- Red 300cm [model: CA2030]
- Yellow 50cm [model: CA4005]
- Yellow 100cm [model: CA4010]
- Yellow 200cm [model: CA4020]
- Yellow 300cm [model: CA4030]
- Gray 50cm [model: CA8005]
- Gray 100cm [model: CA8010]
- Gray 200cm [model: CA8020]
- Gray 300cm [model: CA8030]
Consult Factory Download PDF
$photo MA2005 DIN Rail Mounting Kit for DA and EA-Series. Consult Factory Download PDF
$photo IA310x Choke module optimized for brushless drives.
Inductance: IA3100 = 3x50uH; IA3101 = 3x100uH
Nominal current: 10A
Consult Factory Download PDF

EA47 User Manuals

EA47 Software Download

Software Type Overview
CompletePower Plus™ Setup Utility Software Description
ElectroCraft CompletePower™ Plus Set-up Utility is a Windows-based program used for the setup, parameterization, system diagnostics and motion control management of the ElectroCraft CompletePower Plus line of digital servo drives. The ElectroCraft CompletePower™ Plus Set-Up Utility will lead the user through a Step-by-Step Wizard to create the correct configuration information required for the user to run a particular motor with a particular drive. The result will be an "Application" file containing all of the information required to run the motor with the drive.

System Requirements
Computer ElectroCraft CompletePower™ Plus can be installed on any IBM™ PC compatible computer running:
• Windows 95/98
• Windows NT 4
• Windows 2000
• Windows XP

Display
A VGA display is required. A color monitor display makes it possible to take full advantage of ElectroCraft CompletePower™ Plus's graphic interface. The recommended screen resolution is 1024 x 728. A resolution of 800 x 600 will also function properly.

Printer
The ElectroCraft CompletePower™ Plus Set-up Utility uses the default printer installed on your computer. For optimal resolution, especially when printing graphs, use a high resolution (300-dpi) laser or ink jet printer.

Mouse
A mouse or other pointing device is required to use ElectroCraft CompletePower™ Plus Set-up Utility.

Serial I/O
The ElectroCraft CompletePower™ Plus Set-up Utility can be configured to use the PC's serial port for communication between the host PC and an ElectroCraft drive. A RS-232 serial cable is required between the host PC and the drive.

Download Disclaimer
Software download and registration require Internet Explorer 7 and above, Firefox 3, or Safari.





Download Disclaimer
Software download and registration require Internet Explorer 7 and above, Firefox 3, or Safari.