SCA-SS-70 : CompletePower™ Drives
Technology: PMDC Servo
Quadrants: 4
Nominal Current: 10A or 30A
Quadrants: 4
Nominal Current: 10A or 30A
For Brush-Commutated PMDC Motors. Up to 2100 W.
This PWM four-quadrant PMDC servo amplifier is fully enclosed in a rugged aluminum case which can be panel mounted for easy integration. The drive can be configured in a variety of torque and speed control modes with the mode of operation being set by simple DIP switches. The drive handles continuous currents up to 30 Amps and provides a peak current of 60 Amps. The drive is protected against over-current, over-temperature, motor short-circuit and incorporates state of the art MOSFET technology for maximum efficiency. Connectivity is achieved with simple screw-terminals for control/feedback inputs, supply power and motor connections.
SCA-SS-70 Specifications
| Model Numbers | Power Supply Voltage (VDC) | Aux Voltage (VDC) | Continuous Current (Amps) | Peak Current (Amps) | Max Power (Watts) | Frequency of Power Output Stage (kHz) | Efficiency (%) |
|---|---|---|---|---|---|---|---|
| SCA-SS-70-30 | 11 - 70 | 5 - 24 | 30 | 60 | 1200 with heatsink | 49 | 95 |
| SCA-SS-70-10 | 11 - 70 | 5 - 24 | 10 | 20 | 700 with heatsink | 49 | 95 |
| Control Inputs | |
|---|---|
| Set Value | -10 to +10 VDC |
| Encoder input signals | channel A,B / TTL / max 100 kHz |
| Tach (VDC) | ±50V |
| Enable | 8 to 30 |
| Fwd/Rev | 8 to 30 |
| Brake | 8 to 30 |
| Disable Rev | 8 to 30 |
| Disable Fwd | 8 to 30 |
| Outputs | |
| Auxillary Voltage Sources | 5V/100mA |
| Auxillary Voltage Sources | 15 VDC/20mA |
| Monitor I | 0.25V/.16A |
| Monitor n | 10VDC/nmax |
| Error | open collector max 30VDC |
| Display | |
| LEDs | green = power / red = fault |
| Potentiometers | |
| Function of Potentiometers | offset / nmax / gain / IxR / Imax |
| Mechanical Specs | |
| Dimensions (L x W x H) inches / (mm) | SCA-SS-70-10: 7.09 x 3.94 x 1.57 / (180) x (100) x (40) SCA-SS-70-30: 7.87 x 3.94 x 3.15 / (200) x (100) x (80) |
| Mounting Hole Distance (mm) | 120 X 90 |
| Weight in ounces / (grams) | 4.23 (120) |
| Operating Temperature (°C) | -10 to +45 |
| Storage Temperature (°C) | -40 to +85 |
| Humidity Range Not Condensing (%rel) | 20% to 80% Relative, Non-condensing |
| Operation Mode | |
| Operation Mode | speed-control by Voltage speed-control by DC-tach speed-control by encoder torque control IxR-compensation analog positioning |
SCA-SS-70 Technical Drawings
