PFC3000 : CompletePower™ Drives
Technology: Power Factor Correction
Nominal Power: 2.4 kW
Nominal Power: 2.4 kW
Power Correction for High Power Applications
Power Factor Correction (PFC) is required in any motion control application demanding optimum utilization of available line currents and/or minimum line current distortion. Power factor correction (PFC) is required in any motion control application demanding optimum utilization of available line currents and/or minimum line current distortion. An ElectroCraft PFC3000 module can give the system more power without increasing line capacity and offers reliable operation while reducing peak AC current input needs. The ElectroCraft module attenuates AC line harmonics induced by switching power amplifiers and prevents overloading of neutral conductors and transformers.
PFC3000 Specifications
| Model Numbers | Input Voltage (VDC) | Output Voltage (VDC) | Logic Supply Voltage (VDC) | Continuous Current (Amps) | Peak Current (Amps) | Max Power (kW) |
|---|---|---|---|---|---|---|
| PFC3001-400-1012 | 185-240 / 1 ф | 395-420 (Regulated) | - | 4 | 6 | 3500 |
| Performance | |
|---|---|
| Power Factor | > .99 at full load |
| Efficiency | 100 Watts loss at full load |
| Fault Conditions | |
| Fault Conditions | Heatsink Over Temperature Loss of Regulation Loss of Logic Power Over / Under Voltage |
| Communications | |
| Communications | I2C |
| Mechanical Specs | |
| Dimensions (L x W x H) inches / (mm) | 11.1 x 8.40 x 4.13 / (282) x (213) x (105) |
| Weight in ounces / (grams) | 121 (3429) |
| Operating Temperature (°C) | 0 to 50 |
| Storage Temperature (°C) | -40 to +85 |
| Humidity Range Not Condensing (%rel) | 5% to 95% Relative, Non-condensing |
| Regulatory Compliance | |
| Safety | EN60950 / UL1950 / CSA22.2.14 |
| Power Harmonics | EN61000-3-2 |
| Operation Mode | |
| Operation Mode | Speed control by Hall sensors Speed control by Encoder PWM Position |
PFC3000 Technical Drawings
